Toro Dingo 320-D
Call for Price
The labor-saving Dingo 320-D gives you greater capability and effortless maneuverability so you can get more done with less time in a short learning curve-even for inexperienced operators. These machines are built to deliver a high power-to- weight ratio in the compact utility loader category. The Dingo 320-D also has zero-turn maneuverability to handle countless jobs on every site... dig, haul, plant and build.
- 20 HP (14.9 kw) Kubota Diesel Engine
- 4-Paw® Independent 4-Wheel Drive
- 2-Pump System
- 2 Ground Speeds
- 2 Ground Speeds: Operator can select low or high speed ground speed. Low speed directs more hydraulic power to the attachment and high speed directs more power to the wheels. The low speed option also helps new operators shorten their learning curve.
- 4-Paw® Independent 4-Wheel Drive: Directs hydraulic flow and pressure to all the wheels, at all times. You can power through the toughest conditions and reduce the likelihood of getting stuck. The 4-Paw eliminates the use of chains - reducing maintenance and eliminating the chance of a broken chain.
- Compact Size & Maneuverability: Get the Dingo into tight spaces where only hand labor could go before. Add to the easy spin steer turning, and you'll be able to power through the toughest jobs. This means landscape contractors can use the incredible power of the Dingo to save time and money on labor.
- Fingertip Controls: Easy-to-reach 4-stick fingertip hand controls enable all functions from the operator position. The operator controls all movements of the machine and attachments with his fingertips.
- Durable Hood: Durable, flexible resin hood protects your engine from damage and keeps dirt and debris out of the engine compartment. Your machine will run longer with less downtime.
- Hydraulic Power: Up to 10.8 gpm (40.9 lpm) at 3000 psi (207 bar) hydraulic system gives you incredible hydraulic power to auger up to 30" (76 cm) holes or trench 36" (91 cm) deep.
- 2-Pump Hydraulic System: Independent power can be supplied to the attachment or the wheels. The 2-pump system offers a high flow of 10.8 gpm (37.9 lpm) and a low flow of 4 gpm (15.1 lpm). This provides better usage of power to get the job done as well as not relying on one pump for shared power!
- Quick Attach System™: Each attachment is equipped with Toro's unique Quick Attach System™. The Dingo QAS makes changing attachments as simple as turning 2 levers. Each attachment is designed to be installed in less than 1 minute. (One exception - the backhoe takes 2 minutes.)
- Controls: Key, throttle, choke
- Cooling System: Air cooled
- Engine: 20 hp (14.9 kw) Kubota Diesel
- Ground Clearance: 5.8" (15 cm) front & rear
- Ground Speed: 0-3mph (0 - 4.8 kph) forward/ reverse
- Height: 48.7" (123.7cm)
- High Flow Pump: 10.8 gpm (40.9 lpm)
- Hinge Pin Height: 66" (167.6cm) std. bucket
- Hydraulic Reservoir Cap.: 17 gallons (64 L)
- Hydraulic System Pressure: 3250 psi (224 bar)
- Length: 62" (157.5cm); 82.8" (210.3 cm) w/ bucket
- Loader Hydraulic System: 2 control levers- push/pull
- Low Flow Pump: 4 gpm (15.1 lpm)
- Operating Capacity: 515 lb. (233.6 kg) w/ 200 lb (90.7 kg) operator
- Steering Controls: Zero turn type w/ 2 controls
- Tip Capacity: 1030lb. (467.2 kg) w/ 200lb (90.7 kg) operator
- Warranty: Product - One Year / Engine - Two Year
- Width: 40.5" (109.9cm) std tires
- Engine Type
- 20 hp (14.9 kw) Diesel
- Engine Manufacturer
- Bucket Capacity
- 1030 lb. (467.2 kg)
- Max Ground Speed
- 0-3mph (0 - 4.8 kph) forward/ reverse
- 62 in. (157.5cm); 82.8 in. (210.3 cm) w/ bucket
- 40.5 in. (109.9cm) std tires
- 48.7 in. (123.7cm)